Supplies for Entrust Datacard CR805 printer

Entrust CR805 CMYK-K Color Ribbon allows you to make full color prints with sharp detail and accurate color matching on up to 1000 dual sided prints. With its pigment based dye, this special ribbon uses four colors C = Cyan, M = Magenta, Y = Yellow, K = Black to give stunning results every time. 

Perfectly compatible with the CR805 card printer, Entrust CR805 CMYK Color Ribbon lets you make up to 1000 single-sided prints and 500 dual-sided prints with superb color quality, bursting with vibrancy. This ribbon contains four unique colored panels - Cyan (C), Magenta (M), Yellow (Y) and Black (K) allowing you to get the richest colors possible in each print. 

Upgrade your Entrust Artista CR805 printer from an R4 to R5 main board and unlock advanced card issuance capabilities with the official Multi-Hopper Upgrade Kit. This upgrade enables your CR805 to support multi-hopper operation—allowing for simultaneous management of multiple card types or projects without frequent card reloading.

Upgrade your Entrust Datacard Artista CR805 card printer with the Upgrade Kit, designed to bring earlier R4 main board systems up to the enhanced R5 platform. This kit enables users to benefit from the improved performance, expanded feature compatibility, and support for additional modules offered by the R5 main board.

Enhance your Entrust Artista CR805 card printer with advanced encoding capabilities using this comprehensive upgrade kit. Featuring an ISO magnetic stripe encoder and a loosely coupled HID Omnikey smart card encoder, this kit empowers you to issue highly secure and multi-technology ID cards in a single printing workflow. Effortlessly encode magnetic stripes and program smart cards for HID Prox, iCLASS, iCLASS SE, and iCLASS SEOS technologies, supporting both read and write operations for flexible credential management.

Easily expand the capabilities of your Entrust Datacard Artista CR805 card printer with the official Single-Hopper to Multi-Hopper Upgrade Kit. Designed for seamless integration, this kit allows you to upgrade your single-hopper CR805 to a multi-hopper configuration—enabling efficient management of multiple card types or projects without the need for frequent manual card reloading.
Before installation, verify your printer’s main board version using Tech Tip ‘CX_Retransfer_Series-106’ to ensure it supports the upgrade (R5 main board required).

Maintain efficient card issuance and minimize downtime with the Entrust Artista CR805, CR825, and CE875 Spare 125-Card Input Hopper for Single Hopper configurations. This genuine, removable hopper is designed for quick replacement or as a convenient backup, letting users preload cards and swap hoppers as needed for uninterrupted workflow. Engineered for perfect compatibility with Entrust Artista series single-hopper printers, the spare input hopper is ideal for high-volume environments, service bureaus, universities, or any organization seeking reliable, flexible card management.

This removable design ensures fast installation, secure card storage, and seamless integration with your Entrust Artista printer.

Card Inspection Gloves, Nylon (Pack of 12 pairs)

Gloves used for transporting cards to and from printers in a safe and cleanly manner.

• Weight: 0.25lbs
• Compatible with CE875, CR500, SR200, SR300, CR825, CR805 Datacard ID card printers

• Cleaning Cards (10) Per Pack.  Double-sided adhesive coated for cleaning debris from transport rollers.

Keeping your printer clean and dust free is an easy yet very important part of printer maintenance. Over time the carry dust and other small pieces in to the printer that can potentially damage your print head and other parts of your printer. By routinely cleaning your printer you ensure that it will run problem free for years to come.

For use with the following printers: CD800, SP25, SP25 Plus, SP35, SP35 Plus, SP55, SP55Plus, SP75, and SP75 Plus.

Cleaning Swab (5 Pack) (Isopropanol saturated cleaning swabs for cleaning debris & dust from printheads & hard to reach internal printer areas. This item replaces the previous cleaning pen.)

• Compatible with all Datacard printers
• 5 uses

Entrust CMYKR Color Ribbon is a great choice for those who need reliable single-sided prints. This ribbon was designed specifically for use with CR805 card printers, and it provides accurate color output of up to 1000 single-sided prints. Whether producing cards for Identification, access control, or loyalty/gift cards – the Entrust Color Ribbon delivers precise results every time.

The tactile foil cassette contains a one-time use foil. The following tactile foil cassettes are available. 

Storage Guidelines

• Store the foil cassette in the original package until you load it in the impresser. Keep the original packaging closed until you are ready to use the cassette.
• The cassette maintains its quality for about one year. For optimum card quality, purchase and store quantities of material that can be used within one year.
• If your site requires secure storage and tracking, follow your organization’s policy for storing and tracking the supplies used to make cards.
• Store the cassette in a location away from direct sunlight, with a temperature between 50° and 80°F (10° and 27°C). A range of 30% to 70% humidity is recommended.
• Install the cassette at room temperature. If supplies are stored in an environment that is cooler than the printer environment, allow supplies to reach room temperature before you use them.
• If the printer will not be used for an extended period, remove supplies from the system and store them with new supplies.

This product consists of a polyethylene terephthalate (PET) film with thin layers of specialized coatings. This film is compatible for use in the Datacard® CR805 and CR805 CLM. The printer prints colored images onto the retransfer film (RTM). The colored image and the RTM coatings are then transferred to plastic cards using a heated roller.

Printer Usage: Datacard certifies that this film is optimized for use in the following Datacard® printers:

• Datacard® CR805 and CR805 CLM
• CR Series card printers feature Datacard® proprietary ribbons, which are designed specifically for the CR Series card printer. When the printer recognizes that a Datacard® ribbon is installed, all enhanced product features are enabled and successful card printing can begin. The printer will only print color images when Datacard® proprietary color ribbons are installed. Datacard is your exclusive source for proprietary ribbons for the CR Series card printers.

Recommended storage:

• Temperature: 50 - 80ºF (10 - 27ºC)
• Humidity: 30 – 70% RH (non-condensing)
• Sunlight: Do not store any supplies in direct sunlight or near a heat source

General Description: This color ribbon kit contains three items; all are compatible with several Datacard® card printers (see below):

• One CMYP-KPi Color Ribbon.
• This product is a solid, multicolored plastic film that acts as an article under normal conditions of use. It consists of polyethylene terephthalate (PET) film with thin layers of specialized pigment coatings. Using a thermal print head, the pigment coatings are transferred to the retransfer film prior to the film being applied to a card.
• One adhesive cleaning sleeve. Sleeve with adhesive cleaning wrap and removable protective cover applied to outside of plastic cylinder.
• One isopropanol cleaning card. PVC card with outer layers of absorbent cleaning material saturated with isopropanol.

Printer Usage: Datacard certifies that this ribbon is optimized for use in the following Datacard® printers:

• Datacard® CR805 and CR805 CLM
• CR Series card printers feature Datacard® proprietary ribbons, which are designed specifically for the CR Series card printer. When the printer recognizes that a Datacard® ribbon is installed, all enhanced product features are enabled and successful card printing can begin. The printer will only print color images when Datacard® proprietary color ribbons are installed. Datacard is your exclusive source for proprietary ribbons for the CR Series card printers.

Packaging: Ribbon kits are enclosed in a Datacard® Certified Supplies, resealable, clamshell that include loading and usage instructions. Sixteen unit clamshells are included in one case of product.

Recommended storage:

• Temperature: 50 - 80ºF (10 - 27ºC)
• Humidity: 30 – 70% RH (non-condensing)
• Sunlight: Do not store any supplies in direct sunlight or near a heat source

General Description: This color ribbon kit contains three items; all are compatible with several Datacard® card printers (see below):

• One CMYKP-KPi Color Ribbon.
• This product is a solid, multicolored plastic film that acts as an article under normal conditions of use. It consists of polyethylene terephthalate (PET) film with thin layers of specialized pigment coatings. Using a thermal print head, the pigment coatings are transferred to the retransfer film prior to the film being applied to a card.
• One adhesive cleaning sleeve.
• Sleeve with adhesive cleaning wrap and removable protective cover applied to outside of plastic cylinder.
• One isopropanol cleaning card.
• PVC card with outer layers of absorbent cleaning material saturated with isopropanol.

Printer Usage: Datacard certifies that this ribbon is optimized for use in the following Datacard® printers:

• Datacard® CR805 and CR805 CLM
• CR Series card printers feature Datacard® proprietary ribbons, which are designed specifically for the CR Series card printer. When the printer recognizes that a Datacard® ribbon is installed, all enhanced product features are enabled and successful card printing can begin. The printer will only print color images when Datacard® proprietary color ribbons are installed. Datacard is your exclusive source for proprietary ribbons for the CR Series card printers.

Packaging: Ribbon kits are enclosed in a Datacard® Certified Supplies, resealable, clamshell that include loading and usage instructions. Sixteen unit clamshells are included in one case of product.

Recommended storage:

• Temperature: 50 - 80ºF (10 - 27ºC)
• Humidity: 30 – 70% RH (non-condensing)
• Sunlight: Do not store any supplies in direct sunlight or near a heat source

• One FCMYP-KP Color Ribbon.
• This product is a solid, multicolored plastic film that acts as an article under normal conditions of use. It consists of polyethylene terephthalate (PET) film with thin layers of specialized pigment coatings. Using a thermal print head, the pigment coatings are transferred to the retransfer film prior to the film being applied to a card.
• One adhesive cleaning sleeve.
• Sleeve with adhesive cleaning wrap and removable protective cover applied to outside of the plastic cylinder.
• One isopropanol cleaning card.
  PVC card with outer layers of absorbent cleaning material saturated with isopropanol.

• Datacard® CR805 and CR805 CLM
• CR Series card printers feature Datacard® proprietary ribbons, which are designed specifically for the CR Series card printer. When the printer recognizes that a Datacard® ribbon is installed, all enhanced product features are enabled and successful card printing can begin. The printer will only print color images when Datacard® proprietary color ribbons are installed. Datacard is your exclusive source for proprietary ribbons for the CR Series card printers.

• Temperature: 50 - 80ºF (10 - 27ºC)
• Humidity: 30 – 70% RH (non-condensing)
• Sunlight: Do not store any supplies in direct sunlight or near a heat source

Achieve premium, long-lasting card protection with Entrust CR805 Primerless Clear Satin Retransfer Film. Specially formulated for use with Entrust CR805 printers and compatible primerless color ribbons, this advanced film delivers superior image quality and durable protection for every card.

Each roll yields up to 1,000 single-sided (simplex) or 500 double-sided (duplex) prints, making it an excellent choice for high-volume card issuance environments. This unique primerless film must be paired with Entrust primerless color ribbons for optimal performance and consistent, professional results.

This pigment ribbon is specifically designed for flat card printing, offering full 4-color printing on the card front and crisp black printing on the back. The integrated interceptor (Ki) panel acts as a print zone blocker, ensuring precise masking for magnetic stripes and signature panels—ideal for banking and payment card applications.

Engineered for use exclusively with Entrust primerless retransfer film, this unique ribbon formulation eliminates the need for a primer panel while delivering outstanding color, durability, and compatibility. Each roll yields up to 500 cards, supporting high-quality, secure issuance in demanding environments.

Enhance card security and add a professional branding element with the Entrust Datacard Generic Tactile Impression Die. This specialty die is designed for use with compatible Entrust Datacard card printers and tactile impression modules, embossing a subtle raised design directly onto the surface of each card. The tactile impression not only increases tamper resistance but also provides a unique texture that can reinforce authenticity and promote your organization’s image.
Available in several generic designs and sizes, these dies are ideal for government, financial, healthcare, education, and corporate applications. Compatible with both portrait and landscape card orientations, each die is easy to install in factory or field environments.

Choose from a variety of generic designs such as Globe, Secure Lock, Bank, Pillars, and more, or inquire about custom dies to match your specific branding or security needs.

Entrust Datacard DuraGard laminates provide a strong line of defense against fraud and card wear. Polyester laminate patch that provides a layer of protection over your printed cards, making them more durable. Generic holographic design secures your cards by protecting them from tampering and counterfeiting.

Entrust Datacard DuraGard laminates provide a strong line of defense against fraud and card wear. Polyester laminate patch that provides a layer of protection over your printed cards, making them more durable. Generic holographic design secures your cards by protecting them from tampering and counterfeiting.

The DuraGard laminate 1 mil clear film protects your cards from everyday wear and tear.

This module may be used in conjunction with a retransfer printer to produce secure identification cards or documents. 

Enhance your card program’s security and authenticity with the Entrust Standard Tactile Impresser Module, factory-installed and equipped with the official Entrust branded die. This module creates a raised, tactile impression on the surface of each card, providing a highly visible and touchable security feature that deters tampering and counterfeiting. The tactile impression module is ideal for applications where physical verification and an added layer of protection are essential, such as government IDs, corporate badges, financial cards, and healthcare credentials.

The printer includes bolt-down openings that you can use to secure it to a mounting surface.
You need the following supplies:

• The bolt-down kit (part no. 512969-001) contains two M6 well nuts.
• Two M6 (6 mm) screws, purchased separately.
• The length of the screws you need depends on the thickness of the mounting surface. The
• screw length is the surface thickness + 0.75 inch (20 mm).
• Two M6 washers purchased separately.
• 1/4-inch (7 mm) drill bit.

The tactile impressor feature, designed exclusively for use in the Datacard® SD460TM card printer and CD800TM card printer with inline lamination module, offers an affordable and entry-level security feature ideal for any card program. This patent-pending feature utilizes a mechanical die within the laminator that physically impresses a generic or custom design directly onto the card substrate and overlay or patch laminate in the same pass. The final output is a card with added counterfeiting and tampering resistance that will impress any cardholder.